Product Center / Riveting Series

Toprecision Pull-Through Rivets (PT Rivets) are engineering-grade blind fasteners for dual-side flush riveting. The mandrel is drawn completely through and extracted during…

The Type FT-9 Flush Pull-through Rivet features a true zero-protrusion head (≤0.05mm surface deviation) that self-aligns during pull riveting to achieve flush mounting in 0.8–3.0mm sheet…

These 1.2mm ultra-thin self-clinching nuts are custom-engineered for ultra-slim sheet metal. Made from hardened alloy steel, they achieve powerful pull-out and torque resistance through…

The Grounding Self-Clinching Standoff is pressed into sheet metal to provide a reliable, high-performance grounding connection. It offers low contact resistance and excellent torque-out…

This grounding self-clinching stud uses optimized knurled serrations that cold-flow into sheet metal, creating a permanent electrical path with contact resistance below 2.5mΩ (per IEC…

Self-clinching nuts use precision knurled serrations that cold-flow into pre-punched sheet metal, creating a permanent, high-torque, self-locking connection with a vibration-proof internal…

Type 69 rivet nut carries a factory-applied anaerobic adhesive layer that cures only after installation, forming a high-integrity seal between the nut and the sheet. It provides both a…

Ultra-Thin Self-Clinching Nuts are developed for extremely thin sheet metal, using a precision clinching process to achieve a high-strength permanent bond. A unique root anti-loosening…

Self-Clinching Standoffs and Rivet Studs are produced by high-strength precision cold-heading and provide both sheet metal connection and threaded support. A serrated clinching ring bites…

Manufactured from high-hardness carbon steel or stainless steel by precision cold-heading, these studs feature a unique clinching ring and displacement groove structure. Pressed into sheet…

Made from high-quality low-carbon steel or stainless steel, this self-clinching standoff has a precision pre-applied sealant integrated into its base. Clinching it into sheet metal…

The Type 69 Pre-applied Anaerobic Sealant Rivet Nut delivers IP68-rated waterproofing and permanent anti-vibration locking through a pre-applied anaerobic adhesive layer that activates…

The Knurled Panel Clinch Thumb Screw features a self-locking knurled shank that press-fits securely into sheet metal without drilling or riveting tools. Its ergonomic thumb-groove head…

The Type 71 Flush Knurled Sealing Rivet Nut provides IP67-rated waterproofing and vibration-proof threading. Its knurled sealing collar compresses during pull riveting to close the joint…

The Flush-Fit Hex Rivet Nut uses a full-hex body installed by pull riveting to create high-strength internal threading in thin sheet. Its flat, countersunk head aligns seamlessly with the…