Clearance Machine-Thread Micro Screw CM1.2×4.0
Clearance Machine-Thread Micro Screw CM1.2×4.0 — clearance stock, available while stocks last at a favourable price; send an inquiry to confirm current availability.
| Size / Model | CM1.2×4.0 |
|---|---|
| Product Type | Machine-thread micro screw |
| Stock Status | In stock |
| Item No. | 100100200164 |
| Remarks | Slow-moving clearance stock, price on request |
Overview
This item comes from slow-moving stock held at the Shenzhen warehouse. It is a standard production part from the regular range, offered at a reduced price while the remaining quantity lasts, and it is not a second-grade or out-of-tolerance item. This listing: size CM1.2×4.0, type Machine-thread micro screw, item no. 100100200164.
Advantages
Available from stock, so there is no tooling lead time for the remaining quantity.
Suitable for prototype builds, spares and non-critical assemblies where a specific finish or grade is not mandatory.
Same production specification as the catalogue item, with the same material and finish called out on the size designation.
Applications
Prototype and pilot builds, maintenance spares, fixture and jig making, and production where the drawing allows the standard finish shown in the size designation.
Stock is limited and not replenished: confirm the remaining quantity before designing the part into a production build. If the size is critical to a released drawing, check the finish and grade against the specification rather than assuming equivalence.
Product information is supplied by Toprecision. Custom parts can be produced to drawing — contact us for samples or a quotation.
Specifications across this series
1381 parts in this series
Values are taken from each part’s own attribute set. Changing length, material or finish changes pull-out strength and installation torque, so compare the row that matches your drawing.
Selection and test data: engagement length, standards, salt-spray hours
FAQ
What are the key dimensions of this part?
Size / Model CM1.2×4.0, Product Type Machine-thread micro screw, Stock Status In stock, Item No. 100100200164.
What material and finish is it supplied in?
Carbon Steel.
What should I verify before ordering or installing it?
Stock is limited and not replenished: confirm the remaining quantity before designing the part into a production build. If the size is critical to a released drawing, check the finish and grade against the specification rather than assuming equivalence.