SelfSert-SBE Tri-Slot Self-Tapping Insert (Type E) M10×14 Carbon Steel
SelfSert-SBE (SelfSert-SBE self-tapping insert with lead-in) SSBE-M10×14, internal thread M10, external thread E 14 mm, pitch P 1.5 mm, length B 14 mm, recommended drill diameter 13.3–13.5 mm, minimum drill depth 17 mm. Self-tapping threaded insert with cutting holes; driven straight into the workpiece without pre-tapping, suitable for aluminium alloys and die-cast parts. Volume pricing is negotiable.
| Features | Self-tapping with lead-in |
|---|---|
| Thread Diameter | M10 |
| Thread Standard | ISO metric thread |
| Material | Case-hardened steel |
| Finish | Blue zinc passivated |
| Environmental Compliance | REACH and RoHS compliant |
Overview
The SelfSert-SBE adds a sealing or locking feature to the self-tapping insert form, so the installed insert both provides a serviceable thread and closes the hole against ingress. It is used where a boss must remain watertight or where a screw could otherwise back out of a self-tapping joint. This listing: thread M10, standard ISO metric thread, material Case-hardened steel, finish Blue zinc passivated, features Self-tapping with lead-in.
What sets this listing apart: Thread Diameter M10 (series runs M5 to M16).
Advantages
Combines thread reinforcement and sealing in one part, removing a separate O-ring or sealant step from the assembly.
The self-tapping external thread seals against the parent material along the full engagement length, so leakage paths around the insert are closed rather than left to a face seal.
Retains the one-step installation of the SelfSert family, so the sealing feature adds no station to the line.
Serviceable internal thread means the joint can be opened and reclosed without destroying the seal.
Applications
Outdoor equipment housings, automotive underbody modules, pump and valve bodies, and any die-cast enclosure that must meet an ingress protection rating after the cover is opened for service.
Sealing performance depends on the parent material being sound around the boss: porosity in a die casting will leak through the wall regardless of the insert. Verify the housing passes a leak test after insert installation, not before.
Product information is supplied by Toprecision. Custom parts can be produced to drawing — contact us for samples or a quotation.
Specifications across this series
13 parts in this series
Values are taken from each part’s own attribute set. Changing length, material or finish changes pull-out strength and installation torque, so compare the row that matches your drawing.
Selection and test data: engagement length, standards, salt-spray hours
FAQ
What are the key dimensions of this part?
Features Self-tapping with lead-in, Thread Diameter M10, Thread Standard ISO metric thread, Material Case-hardened steel.
What material and finish is it supplied in?
Case-hardened steel; Blue zinc passivated.
What should I verify before ordering or installing it?
Sealing performance depends on the parent material being sound around the boss: porosity in a die casting will leak through the wall regardless of the insert. Verify the housing passes a leak test after insert installation, not before.